![]() ![]() Switching from a standard floor-mounted toilet to a wall-mounted unit usually requires opening a wall, rerouting the waste pipe, and likely patching the floor tile where your old toilet was. “It will be significantly more expensive to switch from an existing floor to a wall-mounted toilet.” While installation of a standard toilet can cost between $150 and $300, installation of a wall-mounted toilet is more likely to start around $500 and possibly cost up to or over $1,000, depending on where you live and the amount of work that needs to be done. “Depending on your circumstances, you might spend several hundred more to move the supply and waste lines or to reconfigure the studs,” he says. For most people, this is not a do-it-yourself project, Banta says. Though you can often buy the toilet bowl and the in-wall carrier together as a package, you’ll find that many manufacturers sell each of those items, as well as the tank, separately, so you’ll have to be extra careful to choose components that are designed to work together. Whereas a standard toilet can cost less than $200, the combined components of a wall-mounted toilet tend to total upward of $600. ![]() They’re more expensive than standard toilets. While wall-mounted toilets have a few benefits over floor-mounted models, there are some disadvantages to be aware of, mostly in terms of the cost and renovation work that these toilets require. The height of the toilet from the floor can also be customized: It can be adjusted to sit 17 to 19 inches off the ground, which is the Americans with Disabilities Act standard for toilet seats. That’s an easy criterion to meet, given that, as we mentioned above, wall-mounted toilets can be set back up to 10 inches toward the wall compared with regular toilets. In some municipalities, building codes require at least 21 inches in front of the toilet. “These toilets can possibly meet building-code clearances where floor-mounted toilets might not,” says John Banta, the test engineer who oversees CR’s toilet tests. With their compact size, wall-mounted toilets offer more flexibility when designing or updating a bathroom. It also makes cleaning the bathroom floor easier because you don’t have to work around the base of a regular toilet where it meets the floor. Because the toilet hovers above the floor and the tank is inside the wall, it leaves much less toilet to clean: All you need to deal with is the bowl and seat. This makes an especially big difference if you have a small bathroom to begin with: It’ll give you more room to maneuver in front of the toilet, and without a base that touches the floor, the space will feel a little more open and tidy. Wall-mounted toilets can save as much as 10 inches by moving the tank into the wall. In addition to offering a more streamlined look, this setup saves space in the bathroom. This may seem merely a stylistic point, but in fact it can go a long way in making your bathroom more comfortable and accessible, too. Wall-mounted toilets have some advantages over standard toilets, mostly in terms of creating a particular look and feel. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |